How Oft Should a H2o Softener Regenerate?

How often should a water softener regenerate?
How frequently a h2o softener will regenerate or recharge, is controlled past the valve of a h2o softener system. The valve or "control valve" is the 'brain' of the softener unit, since it gives the commands every bit to when the softener regeneration procedure will occur. But kickoff, let'south discuss WHY regeneration occurs.

Why does a water softener regenerate or backwash?

In ion exchange water softeners, difficult h2o is passed through a bed of softening cloth called resin.  As the hardness minerals in h2o come in contact with the resin, the resin is attracted to the hardness minerals and holds onto them.

With the hardness minerals trapped in the resin and removed from the h2o, the water becomes "soft".  Over fourth dimension, water softener resins get completely covered with hardness minerals and need to exist cleaned. That's when backwashing takes place– to brand the organisation "regenerate" or fix to start the softening process once more.

What happens during the regeneration procedure?

During the regeneration process, the water softener floods the resin with brine h2o, thereby "cleaning" the hardness minerals off the resin and sending them down the drain.

The softening resin in the water softener is now clean and gear up to soften water again. This bike is repeated approximately weekly, depending on water usage, assuasive your home to have consistently soft water.

How does a water softener know Watertech Reionator with Triton Valvewhen to regenerate?

There are a wide variety of softener makes and models –and a number of dissimilar valve types, also. Just a water softener regenerates when the control valve tells information technology to outset the regeneration process. There are 2 unlike types of regeneration used in water softening, depending on the type of valve you have: fourth dimension-initiated regeneration and need regeneration.

  1. In "time-initiated regeneration", the clock on the control valve is typically set to have the system regenerate afterwards a certain number of days and at a time of solar day with depression water usage (default setting is often two am). This process will repeat itself at to the lowest degree once a week, at minimum. A water treatment professional volition decide the valve'south settings based on the quality of your water, the size of your resin tank, household water usage, number of people living there, etc. If there is a demand for h2o while the organisation is regenerating, untreated water is available through an automatic internal bypass feature.
  2. With demand regeneration settings , the valve keeps rail of h2o usage and sends the softener into "regeneration mode" after a predetermined amount of water has been processed through the softener. It's sort of similar your cell phone–if you have a lot of apps open and are using your phone a lot, you'll take to charge the phone more than oft.Demand regeneration works the same way. The more water yous're using, the more than often information technology volition need to backwash. For example, if yous have guests staying at your domicile and are using more water than normal, your unit volition need to regenerate more oftentimes.

Both types of regeneration have worked well over many years.  Need regeneration is often considered more efficient in both common salt and water usage considering the system only regenerates when information technology has used up information technology's softening capacity instead of only regenerating on a given day, whether it needs regeneration or not (could happen with time-initiated).

When should I cheque my softeners' control valve?

If you experience an extended ability outage (over an 60 minutes in length), you may need to reset the time of mean solar day on the control valve. Most valve's internal batteries are designed to retain the time of day for upwardly to 24 hours. Refer to your softeners' installation and maintenance guide for more details.

When should I call a Water Treatment Professional?

Change in Water Quality : If yous experience a modify in h2o quality …

  • Starting time check to meet if your brine tank is empty and more salt needs to exist added .
  • Check to see if your system has power.
  • Cheque to see if the drain line has a kink that may be restricting menstruum during regeneration.Free Water Test

If you've ruled out these three factors, then call your local water handling professional person  ASAP. We recommend that you take your water softener serviced annually. This is important considering:

  1. A h2o handling professional can examination your water to make sure that the constituents in your water have not inverse in the past yr. Although our public h2o supply is carefully monitored to ensure water regulations are existence maintained, there can be changes at your local municipal constitute.  Based on water examination results, a professional tin modify your organization settings, install a prefilter, or whatever is needed to ensure you go on to accept outstanding water.
  2. Having your water softener serviced annually will ensure the settings are optimized to save yous money.
  3. If information technology seems like your softener is regenerating too often, a professional person can alter the settings or make needed repairs. If service and/or parts are required, make sure to have your softener manufacturer'south warranty handy. Go along in listen that regenerating more than often than needed is costing you money in h2o usage likewise as actress table salt.
  4. A water treatment professional can sanitize and clean your system to make certain your system continues to produce the all-time possible water for your home.

Looking for a professional who really knows water? WaterTech has authorized water treatment dealerships throughout the country. Observe one near you.

find a watertech dealer